EA60020-OU Portable Malodorous Gas Detector
Contact Info
- Room 503, Building 17, Huafeng International Intelligent Manufacturing City, Wanle Road, Shajing Sub-district, Bao'an District, Shenzhen, 518000
- 池工
- 17796309110
- 17796309110@163.com
l Water-resistant, dust-proof, explosion-proof, shock-proof, anti-static, and electromagnetic interference-resistant.
l Protection level: IP65. Built-in water vapor and dust filter to prevent damage to sensors and instruments caused by water vapor and dust.
l Built-in pump suction measurement, with rapid response. Sampling distance exceeds 10 meters. Special gas path design allows direct detection of gases with negative or positive pressure ranging from -0.5 to 2 kg, without affecting measurement results.
l 7-inch high-definition color screen displays real-time concentration, alarm, time, temperature, humidity, communication, power level, charging status and other information. The menu interface uses high-definition simulation icons to show the function names of each menu.
l USB charging interface, compatible with computers or power banks, and also works with mobile phone chargers. Features overcharge, over-discharge, overvoltage, short circuit and overheating protection, with 5-level accurate power display. Supports USB hot-swapping, and the detector can work normally while charging. RS485 communication is optional.
l Adopts a 5800mAh large-capacity rechargeable polymer battery, enabling continuous operation for more than 12 hours.
l Alarm value is adjustable. Alarm methods include low alarm, high alarm, interval alarm and weighted average alarm.
l High-precision temperature and humidity measurement (optional), with temperature compensation for the sensor. The instrument operates in a temperature range of -40 to 70°C, and can detect gases up to 400°C. For higher temperature gas detection, customization is available (optional high-temperature sampling cooling filter handle or high-temperature and high-humidity pre-processing system).
l Can detect 1 to 18 types of gases simultaneously, with freely switchable units. For conventional gases, no molecular weight input is required; for special gases, automatic calculation and switching are performed after molecular weight input. Optional units: PPM, mg/m³, Vol%, LEL%, PPHM, ppb, mg/L.
l Chinese and English interfaces are available, with the default being Chinese interface. Concise Chinese or English operation prompts are provided.
l Zero point automatic tracking, not affected by zero point drift during long-term use.
l Three-level calibration at the target point ensures linearity and accuracy of measurement, and meets both national standards and local metrology bureau standards.
l Automatic identification and prevention of misoperations in concentration calibration, avoiding adverse effects caused by human factors.
Ordering Guide:
Standard Configuration: Main unit, USB charger, charging cable, user manual, certificate of conformity, warranty card
Optional Accessories: Extension tube, sampling handle, system software
Technical Specifications:
| Name | Description |
| Detectable Gases: | Ammonia, hydrogen sulfide, methyl mercaptan, dimethyl sulfide, trimethylamine, dimethyl disulfide, styrene, carbon disulfide; (optional) |
| Detection Principle: | Electrochemical / catalytic combustion / infrared principle / PID photoionization (optional) |
| Detection Method: | Pump suction type |
| Measurement Range: | Odor: 0-1000 dimensionless; Ammonia: 0-10000 ug/m³; Hydrogen sulfide: 0-10000 ug/m³; Trimethylamine: 0-20000 ug/m³; Methyl mercaptan: 0-20000 ug/m³; Dimethyl sulfide: 0-20000 ug/m³; Dimethyl disulfide: 0-20000 ug/m³; Carbon disulfide: 0-20000 ug/m³; Styrene: 0-20000 ug/m³ |
| Resolution: | Odor: 1 dimensionless; Ammonia: 0-1 ug/m³; Hydrogen sulfide: 0-1 ug/m³; Trimethylamine: 0-1 ug/m³; Methyl mercaptan: 0-1 ug/m³; Dimethyl sulfide: 0-1 ug/m³; Dimethyl disulfide: 0-1 ug/m³; Carbon disulfide: 0-1 ug/m³; Styrene: 0-1 ug/m³ |
| Accuracy: | ±2%FS |
| Repeatability: | Within 3% |
| Response Time: | T90 ≤ 30 seconds |
| Operation Mode: | Touch screen operation |
| Operating Temperature: | -30°C to +70°C (for conventional gases), -20°C to +50°C (for toxic gases) |
| Operating Humidity: | 10%RH to 95%RH, no condensation |
| Operating Pressure: | -30kPa to 200kPa |
| Battery: | 5800mAh rechargeable polymer battery |
| Power Supply: | DC3.6V |
| Charger: | Travel charger with USB interface, USB-powered DC5V, charging temperature range: 0°C to 40°C |
| Charging Time: | ≤6 hours, fully charged in 12 hours |
| Continuous Operating Time: | ≥12 hours (at room temperature) |
| Dimensions: | 25×17×24CM(L×W×H) |
| Weight: | Approx. 2.5KG |
| Explosion-proof Type: | Intrinsically safe type |
| Protection Level: | IP65 |
| Execution Standards: | GB15322.1-2003, GB3836.1-2010, GB3836.2-2010, GB3836.4-2010 |
| Quality Assurance: | 1-year warranty period, free repair during the warranty period. Sensitive components such as sensors are subject to the standards of the sensor manufacturer. |
| Instruments & Meters/Analytical Instruments/Gas Analyzers | |
